• If you set Standby Mode to Communication On, you can output images to an external monitor even if the projector is in standby mode. You can also output

audio to an external speaker. Audio input from the HDMI port, USB-A port, USB-B port, or the LAN port cannot be output.

s Extended - Standby Setup - Standby Mode

• Only analog RGB signals from the Computer1 port can be output to an external monitor. You cannot output signals input from other ports or component video

signals.

• Setting gauges for functions such as Keystone, Configuration menu, or Help screens are not output to the external monitor.

• When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakers and switches to external

output.

p.103

http://www.pureglare.com.au

Table of Contents