Epson EB-485W User Manual page 120

Multimedia
Hide thumbs Also See for EB-485W:
Table of Contents

Advertisement

Problem Solving
Status
Cause
Auto Iris Error
Power Err.
High Temp Warning
Replace Lamp
Obstacle Detection Er‐
ror
If it is not cracked: Reinstall the lamp and turn on the power.
If the error continues: Replace the lamp with a new one and then turn on the power.
If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest
address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
If it is cracked: Contact your local dealer or the nearest address provided in the Epson Projector Contact List. (Images cannot be projected until
the lamp is replaced.)
Epson Projector Contact List
s
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
s "Extended Menu"
p.103
Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
Epson Projector Contact List
s
(This is not an abnormality. However, if the temperature rises too high again, projection stops automatically.)
• Check that the air filter and air exhaust vent are not blocked, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it.
s "Cleaning the Air Filter" p.138, "Replacing the Air Filter"
Replace it with a new lamp.
s "Replacing the Lamp"
p.139
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may blow increases. Replace it with a new
lamp as soon as possible.
A warning sound is output and the message "For safety purposes remove any obstacles blocking the lens." is displayed. The projector will turns
off automatically if no action is taken.
• Remove obstacles around the projection window.
• Clean the obstacle sensor if there is no obstacle.
s "Cleaning the Obstacle Sensor"
p.137
If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest
address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
http://www.pureglare.com.au
Remedy or Status
p.142
120

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eb-480iEb-475wEb-470Eb-485wiEb-480Eb-475wi

Table of Contents