Manual defrost
Triggering defrost
Definition of responsibilities
Output test relays
210/258
Siemens Switzerland Ltd
HVAC Products
The function is deactivated by setting - - on this operating line, or automatically after a
timeout of 5 hours.
Line no.
Operating line
7152
Triggering defrost
No ¦ Yes
The heat pump's defrost function can be manually triggered via this operating line.
Line no.
Operating line
7181
Phone no. responsibility 1
7183
Phone no. responsibility 2
These operating lines are used to set the phone numbers for the relevant error and
maintenance messages.
6.24 Input / output test
The input / output test is used to check correct functioning of the connected
components.
When selecting a setting from the relay test, the relevant relay is energized, thus
putting the connected component into operation. The correct functioning of the relays
and correct wiring can thus be tested.
User manual RVS61.843, RVS41.813
6 The settings in detail
CE1U2355en_02
28. September 2009