Installation - VuQube V20 Installation And Operating Instructions Manual

TOOLS AND MATERIALS REQUIRED
1. Read thru the instructions and make sure you have all the tools and materials required to
complete the installation, including:
• mounting bracket (sold separately - for more information call King Controls at
800-982-9920 or visit our website at www.kingcontrols.com)
• drill and drill bit set
• tape measure
• 7/16" open end wrench (coax connections)
• adhesive sealant (compatible with cab material)
• appropriate tools and fasteners to install all components and wiring
KIT CONTENTS
2. Unpack and identify all components (Fig. 2).
Fig. 2

INSTALLATION

SECTION 2
KIT CONTENTS
Page 3