VuQube V20 Installation And Operating Instructions Manual page 23

1. After you have properly configured the VuQube antenna for your satellite service, the
VuQube will automatically switch between satellites by simply selecting your desired
channel using the receiver's remote control.
.
Note: For better performance when using the automatic satellite switching feature, change channels by selecting
your program from the channel guide rather than channel surfing.
It is common for the picture to pixel or display an error message when the antenna is switching between
satellites, or the signal has been temporarily blocked. PLEASE BE PATIENT. THE PICTURE WILL
RETURN.
If an error message appears for an extended period, selecting CANCEL may help clear the message
more quickly.
Dish Network HD users: If you are unable to receive all of your HD programming, see Dish Network
HDTV: Changing the Satellite Trio on page 22.
AUTOMATIC SATELLITE SWITCHING
Page 21