VuQube V20 Installation And Operating Instructions Manual page 25

1. On the VuQube controller, press and release the
ON button. Wait for the status light to flash orange,
and then WAIT 4 MORE SECONDS.
2. Press and release the ON button 4 times.
The status light starts rapidly flashing green and red.
3. Press and hold the
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF. GO TO PAGE 18 AND RUN THE CHECK SWITCH.
IMPORTANT! YOU MUST RUN THE CHECK SWITCH AFTER SWITCHING TRIOS!
DISH HD Eastern Arc Trio (62, 72, 77)
1. On the VuQube controller, press and release the
ON button. Wait for the status light to flash orange,
and then WAIT 4 MORE SECONDS.
2. Press and release the ON button 4 times.
The status light starts rapidly flashing green and red.
3. Press and hold the
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF. GO TO PAGE 18 AND RUN THE CHECK SWITCH.
IMPORTANT! YOU MUST RUN THE CHECK SWITCH AFTER SWITCHING TRIOS!
DISH HD TRIO (110, 119, 129)
button for 4 seconds.
button for 4 seconds.
Page 23