Table of Contents
Advertisement
802SH
3) Option Settings
Adjust settings in Option when you use SHDownLoader for the first time or when the serial port connection is changed. Click "Setup Option" on "Tool
Bar" to open the screen and follow the procedures below.
1. Select a port from the list on the left.
2. In the field next to "Port (Ex. \\.\COM1)", enter the corresponding serial port name.
3. Set a value for "Baud Rate" according to the serial port.
After performing these procedures for all the required ports, click "Save" to save the settings.
* Do not change settings in other fields.
1
When the settings are correct, "Ready" appears in the corresponding Port Field on Main Screen.
* When a USB-UART serial conversion cable is in use, assigned COM ports may vary as the system environment changes.
4) Procedures
Updating handsets (phones)
•
From the "Select Profile" (combo box) on "Tool Bar", select a profile.
•
Click "Start All Ports" on "Tool Bar". According to the selected profile, all handsets (phones) will be updated via the corresponding ports set up in
"Option".
•
When you select a function from "Select Function" in "Port Field" and click "Connect", handsets (phones) will be updated according to the profile
specified for the port.
CONFIDENTIAL
Figure 15 Option Screen
Figure 16
2 – 8
2
3
Advertisement
Table of Contents
