4. Function (screen example)
4.1. Password entry screen (after SPST start-up)
•
Type in the specified password and press "Enter" on the keyboard.
•
Click "Exit" on the screen to quit.
The screen below appears if the password is incorrect. Click "OK" and enter the password again.
4.2. Function selection (after entering SPST password)
•
Function selection screen.
•
Select one of the following functions from the combo box and click "Execute".
Selecting "SHDownLoader"
Selecting "SHDiag"
Selecting "SHInfoView"
Selecting "SHPwdReset"
Selecting "Change Password"
•
Click "Exit" to quit.
CONFIDENTIAL
Figure 8
Figure 9
Figure 10
See page 2-6
See page 2-10
See page 2-13
See page 2-15
See page 2-17
2 – 5
802SH