Setting Up The Projector - Kodak DP2900 User Manual

This section describes how to:
If you are experienced in setting up presentation systems, use the
Quick Start card that came with the KODAK DP2900 Digital
Projector. Otherwise, follow the procedures described here.
Positioning the Projector
Note:
1. Make sure your projector is on a flat surface. It must be within 10
2. Position the projector the desired distance from the screen.
3. Make sure the projector is unplugged and your computer is turned

Setting up the Projector

determine where to position the projector
•
connect the projector to a computer or a video source
•
turn on and turn off the projector
•
If you want to project from behind a translucent screen, set up
the projector behind your screen. See "Rear Projection" on
page 38 to reverse the image.
feet (3 m) of your power source and within 6 feet (1.8 m) of your
image source.
• The distance from the lens of the projector to the screen and
the zoom setting determine the size of the projected image.
Three projected image sizes are shown here. For more
information about image size, see "Projected Image Size" on
page 69.
off.
20 ft.
12 ft.
5 ft.
17