Metronome Settings; Start/Stop; Beat Volume; Tempo Setting - Yamaha Harmony Director HD-200 Owner's Manual

Metronome Settings

START/STOP

Press the [START/STOP] button to start the metronome.
Pressing the [START/STOP] button again stops the metronome.

BEAT VOLUME

There are the [ACCENT] volume lever, [
[ ] volume lever and [
ume individually. Slide the lever toward the MAX to turn up the volume and slide
the lever toward the MIN to turn down the volume.
Sounding Timing Chart (4/4)
ACCENT
Sounding Timing Chart (6/8)
ACCENT
The quarter notes do not sound and the triplets sound at a double tempo of the triplet.
When the "Alternate" is displayed on the metronome pattern, the notes marked
(Refer to the Setting on page 18)

Tempo Setting

Press the [TEMPO] button to move the cursor to tempo display.
Set the quarter note tempo by using the data entry dial or data entry buttons
[–], [+].
The tempo range is 32~280. Pressing the data entry button [–] and [+] at the
same time returns the tempo value to "120".
16
] volume lever, [
] volume lever. The each volume lever controls the vol-
] volume lever,
●
do not sound.
4
4>