Input Bearing Seal Housing, Disassembly - Volvo Penta MS2 Workshop Manual

Repair - MS2 reverse gear and upper gear housing, sailboat drive
27. Remove the circlip, using circlip pliers.
9991801
28. Press out the taper roller bearing. Use tool no.
884728 and standard shaft 9991801. Then wash the
gearbox housing out.
26
884728
Input bearing seal housing,
disassembly
29. Fix the bearing housing in a vise. Press a screw-
driver into the seal ring. Then place a thick piece of
rubber or leather between the screwdriver and the
bearing housing casting. Prize out the seal ring and
scrap it.
30. Fix the gear in a vise. Use soft facings on the vise
jaws. Then disassemble hook nut with tool no.
884724.
884724