Picture Frame Problems - Kodak EASYSHARE D1025 Extended User Manual

Picture frame problems

If...
Frame does not
turn on.
Frame freezes up or
doesn't work
properly.
Nothing happens
when a memory card
or USB device is
connected.
www.kodak.com/go/support
Try one or more of the following
Make sure the power cable that was included with your frame is
connected securely (see
Unplug the power cable for 5 seconds, then reconnect the cable.
Press the power button.
Unplug the power cable for 5 seconds, then reconnect the cable.
Press the power button.
Reset the frame. Press the Play and Power buttons (see
the same time, and hold for 5 seconds. (Resetting your frame does
not erase your saved files.)
Insert a certified SD/SDHC/MMC/XD Card, with images, into the
upper designated card slot, then push to seat it (see
Insert a certified MS/MS Pro Duo Card, with images, into the lower
designated card slot only, then push to seat it (see
IMPORTANT: Do not insert an MS Pro or MS Pro Duo card in the
top slot. It may be difficult to remove.
Make sure the USB device is connected securely (see
Make sure the file format of your pictures is supported. (See
page 23).
NOTE: Pictures may take a longer time to display when the files are large or when
using a large capacity memory card or other connected device.
Troubleshooting and support
page 3).
page i) at
page 5).
page 5).
page 5).
18