Important Safety Instructions - Kodak EASYSHARE D1025 Extended User Manual

Important safety instructions

CAUTION:
Do not disassemble this product; there are no user-serviceable parts
inside. Refer servicing to qualified service personnel. KODAK AC Adapters
and Battery Chargers are intended for indoor use only. The use of controls,
adjustments, or procedures other than those specified herein may result in
exposure to shock and/or electrical or mechanical hazards. If the LCD
breaks, do not touch the glass or liquid. Contact Kodak customer support.
The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, visit www.kodak/go/accessories.
Use only the AC adapter that was packaged with your frame. Use of other AC
adapters may damage the frame and void your warranties.
Do not place frame near open flame sources such as lighted candles or heaters.
Do not expose this product to liquid, moisture, or extreme temperatures.
Additional care and maintenance
To clean the frame or screen, use a soft, lint-free cloth dampened with lens
cleaning solution or a water-based cleaning solution. Use light pressure.
Do not allow chemicals, such as suntan lotion, to contact painted surfaces.
Service agreements are available in some countries. Contact a dealer of Kodak
products for more information.
For digital frame disposal or recycling information, contact your local authorities. In
the US, visit the Electronics Industry Alliance at
www.kodak.com/go/digitalframesupport.
www.kodak.com/go/support
www.eiae.org or visit
Appendix
24