Replacing Door Panel - Dometic DS 200 Service Manual

- Lift out lock. (Fig. 22)
- Detach lock mounting plate from rosette using 2 standard screwdrivers, place
on new lock. (Fig. 23)
Figure 22
- Reassembly is done in reverse order
- Test locking - opening, adjust locking plate as necessary. (Fig. 24)
Figure 24

2.2.3. Replacing door panel

- Remove mounting screw of forehead panel and lock cover. (see 2.2.2.)
- Slightly pull forehead panel, remove
- Pull out door panel from groove of doorframe, facilitating the pull by slightly
bending the door panel
Figure 25
- Insert new door panel (max. panel thickness 2 mm) into door, push in place.
(Fig. 25)
- Reinsert forehead panel, secure with screws
- Push lock cover in place.
Figure 23
9