Call Pickup - Samsung DCS Compact II General Description Manual

DCS Compact II General Description
l
Call Hold (Exclusive)
Outside calls can be placed on exclusive hold at any keyset by pressing the
HOLD key twice during a call. Calls placed on exclusive hold can only be
retrieved at the keyset that placed the call on hold. Intercom calls are always
placed on exclusive hold.
Call Hold (System)
Outside calls can be placed on system hold at any station. Users may dial the
access code or press the HOLD button. Calls on system hold may be retrieved at
any station.
Call Park and Page
Each C.O. line has its own park zone. This simple method eliminates confusion
and ensures that a park zone is always available. Pressing the PAGE key parks
the call automatically. There are no extra buttons to press and there is no lost
time looking for a free zone.

Call Pickup

l
l
This feature forwards C.O. calls to an external number via a central office
trunk if allowed by class of service. These C.O. calls forward only after the
programmable external call forward delay timer expires.
To Voice Mail
Each station may be programmed to allow or deny the ability to forward
intercom calls to voice mail.
Directed
With directed call pickup, users can answer calls ringing at any station by
dialing a code plus that station's extension number/incoming trunk
number or by pressing the feature button and then dialing the extension
number/incoming trunk number.
Groups (20)
In addition, calls can be picked up from a station group in a similar
manner. The group pickup feature allows users to answer any call ringing
within any pickup group. There are 20 pickup groups available. A station
cannot be in more than one pickup group. To use this feature, station
users either dial the access code or press the assigned feature button
followed by the pickup group number.
4-5
Chapter 4. Features