Hot Line - Samsung DCS Compact II General Description Manual

DCS Compact II General Description
the digit 5. These can be changed but will affect other feature access codes. All
user guides are written using the default numbering plan.
Flexible Ringing
Each C.O. line can be programmed to ring at any station or station group. Each
line can be assigned a day ring destination and a night ring destination.

Hot Line

Stations can be programmed to call a pre–defined station or station group
whenever that station goes off–hook. A hot line delay timer of 1–250 seconds
can be programmed to allow sufficient time to make a different call.
In Group/Out of Group
Individuals assigned to a station hunt group may temporarily remove their
telephones from the group by pressing the In/Out of Group button provided that
there should be someone still in the group. Stations out of a group will not
receive calls to that group but will continue to receive calls to their individual
extension numbers. When desired, the user may put him/herself back into the
group by pressing the button again. Users who do not have this button may dial
the access code and the group desired. A station user is allowed to be in several
groups if a key and the extender of that group are assigned for each group on
the user's phone.
Incoming Call Distribution
Incoming calls can be assigned to ring a distributed station hunt group. This
allows all members of the group to share the call load.
Incoming/Outgoing Service
Outside lines are available for incoming or outgoing service. Programming
allows any outside line to be used for incoming calls only, outgoing calls only or
both–way service.
Individual Line Control
4-13
Chapter 4. Features