Care And Maintenance; Upgrading Your Software And Firmware - Kodak EasyShare M1073 IS Extended User Manual

Face Detect Capture—On, Off
Sharpness modes—High, Normal, Low
Auto power off—Selectable 1, 3, 5, 10 minutes
Microphone—Yes (for audio recording at Video mode)
Speaker—Yes
Color modes—Color (high, natural, low), Black & White, Sepia
Tripod mount—1/4 inch
Operating temperature—32–104
Size—92 mm (3.6 in.) x 56.5 mm (2.2 in.) x 22.7 mm (0.9 in.) @ power off
Weight—117 g (4.1 oz.) without battery or card

Care and maintenance

I If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
I Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
Service agreements may be available in your country. Contact a dealer of Kodak
I
products for more information.
For digital camera disposal or recycling information, contact your local authorities.
I
In the US, visit the Electronics Industry Alliance Web site at
Kodak Web site at www.kodak.com/go/m1073support.

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). Visit
www.kodak.com/go/m1073downloads.
www.kodak.com/go/support
Downloaded From camera-usermanual.com Kodak Manuals
° °
F (0–40 C)
Appendix
www.eiae.org or the
55