Miele CVA 6800 Operating And Installation Instructions page 75

Problem
Drink preparation
has been
cancelled.
The drinking
vessel being used
is repeatedly not
recognised by the
automatic spout
adjustment. The
central spout
lowers until it
touches the top of
the cup or glass
and cup
protection
switch-off is
activated.
Cup protection
switch-off does
not work. The
central spout
lowers until it
touches the top of
the vessel and
and the cleaning
container or
another vessel
gets caught
between the
central spout and
the drip tray.
Possible cause and remedy
If the water container becomes empty while a drink is being
prepared, the message "Water container empty. Continue?
Yes / No" will appear in the display after the water container
has been refilled and put back in the machine. If you do not
confirm this message with "Yes" within 5 minutes,
preparation will be cancelled.
Use cups or glasses that are suitable for automatic spout
adjustment.
There is a fault with the automatic spout adjustment.
^ Switch the coffee machine off with the On/Off K sensor.
Wait for approx. 2 minutes before switching it back on.
^ Use another drinking vessel and prepare a drink.
If cup protection switch-off is activated again or the central
spout lowers until it touches the top of the cup or glass
again, please contact Miele.
If the cleaning container is sitting too close to the panel
behind the central spout, or even touches it, the rim of the
container will not be properly recognised by the automatic
spout adjustment.
^ Move the cleaning container forwards a little.
Problem solving guide
75