Miele CVA 6800 Operating And Installation Instructions page 74

Problem solving guide
Problem
The milk pipework
is rinsed but no
rinsing water
comes out of the
central spout. "Fill
and replace the
water container"
appears in the
display.
Neither milk nor
milk froth comes
out of the central
spout.
"Fill and insert milk
flask" appears in
the display even
though the milk
flask has been
filled and inserted
in the machine.
"Empty the drip
tray" appears in
the display, even
though the drip
tray is empty.
The appliance
door cannot be
closed.
74
Possible cause and remedy
The milk pipework or the air suction tube is blocked.
^ Follow the instructions in "Cleaning the milk pipework of
any blockages".
The milk pipework or the air suction tube is blocked.
^ Follow the instructions in "Cleaning the milk pipework of
any blockages".
The milk flask lid could be dirty. Therefore, the sensing
mechanism doesn't function correctly.
^ Clean the lid and the milk flask thoroughly (see "Cleaning
the milk pipework of any blockages").
The drip tray doesn't sit correctly in the appliance.
^ Push the drip tray all the way into the appliance.
The drip tray sensing mechanism is not working.
^ Switch the machine off with the On/Off K sensor.
The metal contacts are dirty.
^ Clean the contacts and dry them thoroughly (see "Cleaning
and care - Drip tray").
The containers are not pushed all the way in.
^ Check the containers.
The door hinges are not correctly aligned.
^ Adjust the door hinges (see "Installation - Adjusting the
door hinges").