Miele CVA 6800 Operating And Installation Instructions page 71

Message
Fault 234
"Too much ground
coffee"
"Push the water
container in until it
engages"
Possible cause and remedy
Cup protection switch-off has been activated three times
since switching on the coffee machine. The cups or glasses
being used are not recognised by the automatic spout
adjustment.
^ Use suitable drinking vessels for automatic spout
adjustment.
There is a fault with the automatic spout adjustment.
^ Switch the coffee machine off with the On/Off K sensor.
Wait for approx. 2 minutes before switching it back on.
There is too much ready ground coffee in the ground coffee
chute.
If more than one level scoop of ground coffee is added to the
coffee chute, the brew unit cannot process the coffee. The
ground coffee will be directed into the waste container and
the fault message will appear in the display.
^ Switch the coffee machine off with the On/Off K sensor.
^ Remove and clean the brew unit (see "Cleaning and care –
Brew unit").
^ Remove the ground coffee inside the coffee machine, e.g.
with a vacuum cleaner.
Use the coffee spoon supplied to add ground coffee to the
ground coffee chute. Add only one portion of ground coffee
to the chute.
The water container is not in the correct position.
^ Remove the water container and push it back in again.
This fault message also appears if the water container was
not correctly filled or fitted for descaling.
^ Fill the water container to the descaling symbol F and
restart the descaling programme.
Problem solving guide
71