Kodak EASYSHARE LS443 User Manual page 91

Camera/Computer Communications
Camera Communications
Problem
The computer
cannot
communicate
with the
camera.
Cannot transfer
pictures. Add
New Hardware
Wizard cannot
locate drivers.
Chapter 9
Cause
There is a problem with
the configuration of the
USB port on the
computer.
Camera power is off.
Battery is not charged.
Some Advanced Power
Management utilities on
laptops turn off ports to
save battery life.
USB cable is not
securely connected.
Software is not installed. Install the software
Too many applications
are running on the
computer.
The Battery Monitor or
similar software runs
constantly.
Software is not installed. Disconnect USB cable. (If using
Solution
See this file on the EASYSHARE
Software CD: USB.html Or, go to:
www.kodak.com/go/camerasuppo
rt
Turn on the camera
Recharge the battery
See the Power Management section
of the laptop user's guide to disable
this feature.
Connect cable to camera and
computer port (page
(page 63).
Disconnect camera from the
computer. Close all software
applications, reconnect camera.
Close that software before starting
the KODAK Software.
Camera Dock, disconnect cable
and remove camera from Dock).
Install EASYSHARE Software
(page 63).
(page 7).
(page 71).
72).
79