Setting Long Time Exposure - Kodak EASYSHARE LS443 User Manual

Setting Long Time Exposure

Use Long Time Exposure to control how long the shutter stays open. Settings
are: Off, 0.7, 1, 1.5, 2, 3, and 4 seconds.
NOTE: Long Time Exposure cannot be used with Exposure Compensation. If
ISO speed has been changed, it is reset to Auto.
Set Long Time Exposure
1 In any Still mode, press the Menu button.
2
Move the joystick
the OK button.
Take the Picture
1
Place the camera on a flat surface or use a tripod.
2 Use the LCD to frame your subject. Press the Shutter button half-way to
set the focus, then continue pressing completely down to take the
picture.
This setting remains until you move the Mode dial or turn off the
camera.
Default flash setting:
Available flash settings:
Camera returns to default: When you change modes or turn off the
34
Chapter 2
to highlight Long Time Exposure
3 Move the joystick
option, then press the OK button.
4 Press the Menu button to exit the menu.
Off
Auto, Flash Off, Fill Flash, Red-eye
camera.
, then press
to select an