Setting Exposure Metering - Kodak EASYSHARE LS443 User Manual

Setting Exposure Metering

Use Exposure Metering to ensure that the proper amount of light enters the
camera lens.
1 In any Still mode, press the Menu button.
2
Move the joystick
the OK button.
Chapter 2
to highlight Exposure Metering
3 Move the joystick
option, then press the OK button.
Multi-patterned— evaluates lighting
conditions throughout the image to give
an optimum picture exposure. Ideal for
general picture taking.
Center-weighted—evaluates the
lighting conditions of the subject centered
in the viewfinder. Ideal for backlit
subjects.
Center-spot—similar to
Center-weighted, except the metering is
concentrated on a smaller area of the
subject centered in the viewfinder. Ideal
when an exact exposure of a specific area
in the picture is needed.
4
Press the Menu button to exit the menu.
This setting remains until you change it.
, then press
to highlight an
31