Displaying Pictures And Videos On A Television - Kodak EASYSHARE LS443 User Manual

Turning On Slide Show Loop
When you turn on Loop, the slide show is continuously repeated.

Displaying Pictures and Videos on a Television

You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input. (Images may not look as good on a
television as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting is correctly set to NTSC or PAL
(page 58).
Video
out
NOTE: If you connect or disconnect the audio/video cable while a slide show is
running, the slide show stops.
Chapter 4
1 On the Slide Show menu, move the joystick
to highlight Loop, then press the OK
button.
2
Move the joystick
then press the OK button.
When you start a slide show, it repeats
until you cancel it by pressing the OK
button or until battery power is
exhausted. The Loop setting remains until
you change it.
1 Connect the audio/video cable from the
camera video-out port to the television
video-in port. (Refer to your television
User's Guide for details.)
The camera LCD turns off; the television
screen acts as the camera display.
2
Review pictures and videos on the television
screen.
to highlight On,
47