Time And Date - D-Link SharePort Go DIR-506L User Manual

Section 3 - Configuration
The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From this section
you can set the time zone that you are in. Daylight Saving can also be configured to automatically adjust the time when needed.
After making your changes, click the Save Settings button.
Time Zone: Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, click the Enable
Enable Daylight
Saving: Daylight Saving check box. Next use the drop-down
menu to select a Daylight Saving Offset and then enter
a start date and an end date for daylight saving time.
Automatically NTP is short for Network Time Protocol. NTP synchronizes
Synchronize computer clock times in a network of computers. Check
with Internet this box to use a NTP server. This will only connect to a
Time Server: server on the Internet, not a local server.
NTP Server
Enter the NTP server or select one from the drop-down
Used:
menu.
D-Link DIR-506L User Manual

Time and Date

57