D-Link SharePort Go DIR-506L User Manual page 27

Section 3 - Configuration
Enter a name for your new wireless network. It is highly
recommended that you enable wireless security and enter a
password that is 8-63 characters long to use for your wireless
network. Click Next to continue.
Note: If you set your DIR-506L to use Repeater Mode, it is
recommended that you use a different Wi-Fi network name. If you
use the same Wi-Fi network name, it will extend your existing Wi-Fi
network and will no longer be listed as a separate Wi-Fi network.
You can connect your devices to your existing Wi-Fi network as
normal, and verify the DIR-506L is working by observing increased
signal strength.
Setup is complete! After confirming your settings, click Save to
save your settings and reboot the DIR-506L.
After the DIR-506L reboots, you will need to reconnect to it using
the wireless network name and password you created.
D-Link DIR-506L User Manual 23