Time And Date - D-Link DSL-3682 User Manual

Section 3 - Configuration
This page allows you to edit the system time and Network Time Protocol (NTP). You can
configure, update, and maintain the correct time on the system clock, and configure Daylight
Saving.
UNIQUE LOCAL ADDRESSES CONFIGURATION
If you enable Automatically synchronize with Internet time servers, enter the Network
Time Protocol (NTP) server addresses:
1st NTP Time Specify an address for the primary Internet time server.
Server:
2nd NTP Time
Specify an address for the secondary Internet Time Server.
Server:
Current Local Displays the current local time.
Time:
Time Zone: Select the appropriate time zone for your location. This information
is required to configure the time-based options for the router.
If you enable Daylight Saving, configure the daylight savings start and end times:
Daylight Saving Specify the time and date when daylight saving should start.
Start:
Daylight Saving Specify the time and date when daylight saving should end.
End:
Click Apply to have your changes take effect.
D-Link DSL-3682 User Manual

Time and Date

TIME CONFIGURATION
DSL-3682 SETUP
Time and Date TIME AND DATE
Internet Setup
TIME AND DATE
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From
2.4G Wireless
this section you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be
configured to automatically adjust the time when needed.
5G Wireless
TIME SETTING
Local Network
☐
Automatically synchronize with Internet time servers
1st NTP time server :
Local IPv6 Network
2nd NTP time server :
Time and Date
TIME CONFIGURATION
Logout
Current Local Time : 2016-08-26 15:32
Time Zone : (GMT+08:00) Beijing, Hong Kong
☐
Enable Daylight Saving
Daylight Saving Start: 2016 Year 03
Daylight Saving End: 2016
Year 03
Apply Cancel
ADVANCED
▼
Mon 03 Day 03 Hour 03 Min 03 Sec
Mon 03 Day 03 Hour 03 Min 03 Sec
60