Section 3 - Configuration
The Routing option is an advanced method of customizing specific routes of data through your network. After making your
changes, click the Save Settings button.
RIP:
Select Enable to turn on routing and auto-select the RIP
version, or select RIPv1 or RIPv2.
Destination IP:
Enter the IP address of packets that will take this route.
Subnet Mask:
Enter the netmask of the route, please note that the octets
must match your destination IP address.
Gateway:
Enter your next hop gateway to be taken if this route is
used.
Hop:
Enter a number to represent the hop value of this route.
Enable:
Check to enable this route or leave unchecked to ignore it.
D-Link DIR-506L User Manual
Routing
53