Troubleshooting
Picture quality problems
If...
The picture is too dark
or underexposed
The picture is too light
The picture is not clear
Camera ready light status
Status
Ready light glows
steady green.
Ready light blinks
green.
46
Try one or more of the following
■
Use Fill flash
(page
not behind the subject.
■
Move so that the distance between you and the subject is
within the effective flash range
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
■
Decrease the shutter speed or increase the ISO speed
(page
13).
■
Turn the flash off
■
Move so that the distance between you and the subject is
within the effective flash range (see
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
■
Increase the shutter speed or decrease the ISO speed
(page
13).
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
■
Clean the lens
(page
■
Make sure the camera is not in Close-up mode if you are
more than 23.7 in. (60 cm) from your subject.
■
Place the camera on a flat, steady surface or use a tripod.
Cause
Shutter button is pressed halfway down. Focus and exposure
are set.
Picture is being processed and saved to the camera.
Pictures are being transferred to computer; camera is
connected.
Camera firmware upgrade is in process.
15) or change your position so light is
(page
(page
15).
page
52).
www.kodak.com/go/support
15).
15).