If...
You cannot take a
picture
Computer/connectivity problems
If...
The computer does
not communicate with
the camera
Slide Show does not
run on an external
video device
www.kodak.com/go/support
Try one or more of the following
■
Turn the camera off, then on again.
■
Depress the shutter button all the way
■
Insert a charged battery
■
Wait until the ready light is green before attempting to
take another picture.
■
Transfer pictures to the computer
pictures from the camera
locations
(page
memory
(page
6).
■
If the camera is in Favorites mode, turn the Mode dial to a
different mode.
Try one or more of the following
■
Turn on the camera.
■
Insert a charged battery
■
Make sure the USB cable is securely connected on the
camera and the computer port
■
Make sure the EasyShare software is installed
NOTE: This camera is not supported by Mac OS 8.6 or 9.x. You may
capture pictures on a card, then use a card reader to transfer
them to the computer.
■
Adjust the camera Video Out setting (NTSC or PAL,
page
25).
■
Make sure the external device settings are correct (see the
device's user's guide).
(page
2).
(page
(page
30), switch image storage
23), or insert a card with available
(page
2).
(page
Troubleshooting
(page
7).
42), delete
42).
(page
35).
45