Picture Quality Problems - Kodak EasyShare C340 User Manual

All manuals and user guides at all-guides.com

Picture quality problems

If... Try one or more of the following
I
Picture is too dark Reposition camera for more available light.
or underexposed
I
Use Fill flash
the subject.
I
Move so that the distance between you and the subject is within the
effective flash range
I
To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light glows green, press the Shutter
button completely down to take the picture.
I
Adjust the exposure compensation
I
Picture is too light Reposition camera to reduce the amount of available light.
I
Turn flash off
I
Move so that the distance between you and the subject is within the
effective flash range
I
To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light glows green, press the Shutter
button completely down to take the picture.
I
Use Auto, Landscape, or Close-up to adjust the exposure
compensation.
I
Picture is not clear To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light glows green, press the Shutter
button completely down to take the picture.
I
Clean the lens
I
Make sure camera is not in Close-up mode if you are more than
27.6 in. (70 cm) from your subject.
I
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.
www.kodak.com/go/support
(page 27) or change your position so light is not behind
(page 9).
(page 30).
(page 27).
(page 9).
(page 60).
Troubleshooting
47