Kodak EasyShare DX7440 User Manual page 20

Taking pictures and videos
Settings apply only in P, A, S, M, and C modes
Settings you change in P, A, S, or M modes apply only to pictures taken in P,
A, S, and M modes. Settings you change in C mode apply only to pictures
taken in C mode.
For example, if you change the Color Mode to Sepia while in P, A, S, or M
mode, then Auto & Scene modes retain the default setting of Color.
NOTE: The settings, including Flash, are maintained for P, A, S, M, and C modes—even when
you change modes or turn off the camera. Use Reset to Default (see
S, M, or C mode to its default setting.
Using the jog dial to change P, A, S, M, or C mode settings
1 Turn the Mode dial to P, A, S, M, or C.
The mode settings are displayed. Available settings are white; unavailable
settings are grey.
2 Use the jog dial:
■ Rotate the jog dial
Press the jog dial to open the setting.
■
Rotate the jog dial
■
(Red settings are out of range and may cause unacceptable image/print
quality. Adjust the value higher or lower until it turns yellow.)
■ Press the jog dial to save the setting.
3 Press the Menu button to change other settings. (See
4 Take a picture.
14
Jog dial
Rotate to move
the cursor or
change settings.
Press to open or
save settings.
to move the cursor to a setting, such as
to change the value of the setting.
page
page
www.kodak.com/go/support
23) to reset P, A,
.
.
20.)