Selecting The Ringer Volume - Panasonic KX-TG2650CN Operating Instructions Manual

Programmable Functions

Selecting the Ringer Volume

You can set the handset and base unit ringer volumes to HIGH, LOW or
OFF. If set to OFF, the handset/base unit will not ring. Your phone comes
from factory set to HIGH.
Handset ringer volume
Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/CH)
2 Press
Ö
arrow points to "Ringer volume",
and press
3 Press
Ö
•The selected volume is displayed and rings.
•To turn the ringer OFF, press and hold
Ö until 2 beeps sound.
To turn the ringer ON, press
in step 3.
•The ringer will sound at the LOW level.
•You can also select the ringer volume while a call is being received.
Press Ö or Ñ while the unit is ringing.
•When set to OFF, "Ringer off" will flash for about 45 seconds before the
handset returns to the standby mode.
•When you replace the battery, the selected ringer volume setting will return to the
factory set (HIGH). Reprogram if necessary.
Base unit ringer volume
Make sure the unit is in the standby mode initially. (You can also select
the ringer volume while a call is being received.)
•To select HIGH or LOW, press
(HOLD/RINGER)
the button, the selected ringer volume
will be displayed and ring.
•To turn the ringer OFF, press and hold
(HOLD/RINGER)
"Ringer off" will be displayed.
•To turn the ringer ON, press
The ringer will sound at the HIGH level.
18
.
or repeatedly until the
Ñ
(Yes key).
á
or to select the desired volume.
Ñ
. Each time you press
until 2 beeps sound.
HIGH
or
Ñ Ö
HIGH
(HOLD/RINGER)
Save directory
H
Ringer volume
GF
Ringer
Low
GF
Low
LOW
OFF
Ringer off
Ringer
Low
Low
LOW
OFF Ringer off
.
H
=Yes
High
High
High
High