Table of Contents
Advertisement
2.7.5
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
2.7.6
Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
[EZ Mode]
2.7.7
CSM (Compatibility Support Module)
This option allows you to control the CSM (Compatibility Support Module) launch parmeters.
Launch CSM [Auto]
Configuration option: [Auto] [Enabled] [Disabled]
The following four items appear when Launch CSM is set to [Enabled].
Boot Device Control [UEFI and L...]
Configuration option: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]
Boot from Network Devices [Legacy OpR...]
Configuration option: [Legacy OpROM first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OpR...]
Configuration option: [Both, Legacy OpROM first] [Both, UEFI first] [Legacy OpROM
first] [UEFI driver first] [Ignore]
Boot from PCIe Expansion Devices [Legacy OpR...]
Configuration option: [Legacy OpROM first] [UEFI driver first]
2.7.8
Security Boot
This option allows you to configure the Security Boot parameters.
OS Type [Other OS]
Configuration option: [Windows UEFI mode] [Other OS]
Secure Boot Mode [Standard]
This item appears only when you set the OS Type to [Windows UEFI mode].
Configuration option: [Standard] [Custom]
The following items appear when Secure Boot Mode is set to [Custom].
Key Management
2-24
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
program.
Sets EZ Mode as the default screen for entering the BIOS setup program.
Install default Secure Boot keys
Configuration options: [Yes] [No]
Load PK from File
Configuration options: [OK]
Copy PK to File
Chapter 2: Getting started
Advertisement
Table of Contents
