Option Rom Messages [Force Bios]; Setup Mode [Ez Mode]; Next Boot After Ac Power Loss [Normal Boot]; Csm Parameters - Asus P8Q77-M2 User Manual

2.7.6

Option ROM Messages [Force BIOS]

[Force BIOS]
[Keep Current]
2.7.7

Setup Mode [EZ Mode]

[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
[EZ Mode]
2.7.8

Next boot after AC Power Loss [Normal Boot]

[Normal Boot]
[Fast Boot]
2.7.9

CSM Parameters

This option controls whether or not CSM (Compatibility Support Module) will be launched.
Launch CSM [Auto]
[Auto]
[Enabled]
[Disabled]
The following four items appear only when you set Launch CSM to [Enabled].
Boot Device Control [UEFI and Legacy OpRom]
Configuration option: [UEFI and Legacy OpRom] [Legacy OpRom only] [UEFI only]
Boot from Network Devices [Legacy OpRom first]
Configuration option: [Legacy OpRom first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OpRom first]
Configuration option: [Both, Legacy OpRom first] [Both, UEFI driver first] [Legacy OpRom
first] [UEFI driver first] [Ignore]
Boot from PCIe/PCI Expansion Devices [Legacy OpRom first]
Configuration option: [Legacy OpRom first] [UEFI driver first]
2-30
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
program.
Sets EZ Mode as the default screen for entering the BIOS setup program.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
The system automatically detects the bootable devices and the add-on
devices.
For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices, or the Windows UEFI mode.
Disable the CSM to fully support the Windows Security Update and
Security Boot.
ASUS P8Q77-M2