Quitting-Disconnecting From The Computer; Using The Card Reader - Kodak DCS Pro SLR/n User Manual

Connecting to Your Computer
Quitting—Disconnecting from the Computer

Using the Card Reader

13-4
Complete these steps when your work with the camera and the computer is
complete.
You can connect or disconnect the camera without turning the camera or
the computer off.
NOTE: WINDOWS Operating System only: Do not disconnect the camera
from the computer while KODAK PROFESSIONAL DCS Camera
Manager is running. Doing so can cause your computer to "hang".
CAUTION
:
Do not disconnect the camera from the computer while
images are being transferred from the camera to the
computer. Doing so can corrupt images on the computer.
1. Exit KODAK PROFESSSIONAL DCS Photo Desk software if is running.
2. Disconnect the camera from the computer.
If your computer has a card reader, you can access images by placing a
memory card containing camera images in the reader. If you have a new
card reader, install it using the instructions accompanying the reader.
1. Remove the memory card from your camera.
2. Insert the memory card into the card reader on your computer.
CAUTION
:
Do not remove a card from the card reader while KODAK
PROFESSIONAL DCS Photo Desk is running. If images on the
card are open in DCS Photo Desk, removing the card can
cause you to lose data.
April 29, 2004