Resetting To Defaults - Kodak DCS Pro SLR/n User Manual

Configuring your Camera

Resetting to Defaults

5-42
NOTE: This feature is available for lenses that you added from the master
list. It is not available for lenses that you have defined.
You can reset strength values for a lens in the user list to the values in the
master list.
1. Choose Lens Optimization from the Capture menu, then highlight the
lens in the user list.
2. Press the right side of the Four-way switch to display the Strength
screen.
3. Choose Reset to Default.
4. Press the OK button.
April 29, 2004