Quitting-Disconnecting From The Computer; Using The Card Reader - Kodak DCS Pro 14n User Manual

Quitting—Disconnecting from the Computer

Using the Card Reader

Complete these steps when your work with the camera and the computer is complete.
You can connect or disconnect the camera without turning the camera or the computer off.
NOTE: WINDOWS Operating System only: Do not disconnect the camera from the
computer while KODAK PROFESSIONAL DCS Camera Manager is running. Doing
so can cause your computer to "hang".
CAUTION
:
Do not disconnect the camera from the computer while images are being
transferred from the camera to the computer. Doing so can corrupt
images on the computer.
1. Exit KODAK PROFESSSIONAL DCS Photo Desk software if is running.
2. Disconnect the camera from the computer.
If your computer has a card reader, you can access images by placing a memory card
containing camera images in the reader. If you have a new card reader, install it using the
instructions accompanying the reader.
1. Remove the memory card from your camera.
2. Insert the memory card into the card reader on your computer.
CAUTION
:
Do not remove a card from the card reader while KODAK PROFESSIONAL
DCS Photo Desk is running. If images on the card are open in DCS Photo
Desk, removing the card can cause you to lose data.