Serial Out Mode - Kodak DCS 700 Series User Manual

Serial Out Mode

When the serial port is in Serial Out mode, your camera sends data to a remotely
connected device.
Serial In and Serial Out modes can work at the same time.
Menu Choice
None No data transmitted.
Image Number A text string containing the image
number of the just-captured image
is sent to the connected device.
1
Select Serial Out from the Serial
Port menu (page 13-2).
2
Select your choice from the
Serial Out Mode menu
(described in the table below).
The setting is retained until you
change it.
Action Comments
13-5
13