Serial Out Mode - Kodak 645 User Manual

Transmitting Data

Serial Out Mode

When the serial port is in Serial Out mode, your
DCS 645 sends data to a remotely connected
device.
Serial In and Serial Out modes can work at
the same time.
Select Serial Out from the Serial Port menu
1
Select your choice from the Serial Out Mode
2
menu (described in the table below).
The setting is retained until you change it.
Contents Back
Next Index
Menu Choice Action
None No data transmitted.
Image Number A text string containing
the image number of
the just-captured
image is sent to the
connected device.
135