Adding Sound To Pictures - Kodak DC265 User Manual

Adding sound to pictures

You can attach sound to a selected picture at any time while reviewing your
pictures from either the filmstrip or full screens.
You can only add sound to or play sound associated with burst and time-
lapse pictures when the series is collapsed. If the camera volume control is
turned down, you will not be able to hear the sound you have recorded. The
volume control adjusts the volume of sound clips attached to pictures only.
4-14
1 Scroll to view the picture you want to select.
Use any of the three methods described in
the "Viewing pictures" section on page 4-7.
2
Press and hold the Record button.
The microphone icon appears on the screen,
along with how long you have been
recording.
Each picture can have only one
attached sound clip.
3 Speak into the microphone on the back of
the camera.
4
Release the Record button.
A sound icon appears indicating the picture
now has attached sound. If a picture has
attached sound, pressing Delete lets you
delete the sound alone or both the picture
and sound.
5
Press one of the following softkeys:
Delete—deletes the picture and any
attached sound.
Save—saves the sound.
Play—plays the sound
Refer to "Playing sound, bursts,
and time-lapse sequences" on page
4-16 for information on sound that
has not been recently recorded.