Table of Contents
Advertisement
Problem
Corrupted Image message is
displayed on the Color LCD
while in the Review mode.
Important: While in the
Capture mode, the thumbnail
appeared normal.
Shutter button does not work.
Camera does not turn on.
Part of the picture is missing.
10-6
Troubleshooting
Cause
The memory card was
ejected during
processing.
Batteries are too low
to complete
processing.
Camera is not turned
on.
Mode dial is not set to
Capture.
Ready light is
blinking. Camera is
processing picture.
The Status Display
reads Full. The
memory card is full.
Batteries are not
installed properly.
Batteries are weak or
depleted.
Something was
blocking the lens
when the picture was
taken.
Your eye or the
picture was not
centered correctly in
the viewfinder.
Solution
The picture must be
retaken.
Replace the batteries or
use the AC Adapter.
The picture must be
retaken.
Turn the camera on and
verify that the green
Ready light turns on.
Set the Mode dial to
Capture.
Wait until Ready light
stops blinking before
attempting to take
another picture.
Transfer pictures to
your computer or
change the memory
card.
Remove the batteries
and install them
according to the
directions on the inside
of the battery door.
Install new batteries or
use the AC adapter.
Keep hands, fingers, or
other objects away
from the lens when
taking pictures.
Leave space around
subject when centering
picture in viewfinder.
Advertisement
Table of Contents
Troubleshooting
