Installing The Batteries - Kodak DC265 User Manual

Installing the batteries

Remove the batteries if the camera will not be used for an extended period of
time. This will extend the battery life and prevent camera damage from battery
leaks or corrosion. If the batteries are removed from the camera for more than a
few days, the date and time will be deleted and must be reset.
WARNING: When using batteries, limit the continuous operation of the color
LCD for previewing pictures to less than 20 minutes. This is
particularly true with Lithium batteries. Previewing pictures
requires a significant electrical current, which over time could
cause your batteries to heat up significantly. Should your camera
become too hot inside, it is designed with protective circuitry to
turn itself off. You should allow sufficient time for the camera to
cool before turning it on again. Consider using an AC adapter
when using Preview mode for extended periods.
Always follow your battery manufacturer directions fully.
2-16
1
Open the battery door.
2 Slide the inside battery cover toward the back of
the camera and then lift it away from the
camera.
3 Insert the batteries as indicated on the battery
cover.
4
Close and lock the inside battery cover and
close the battery door.