Table of Contents
Advertisement
01GB00ICS-X7.book Page 12 Friday, October 12, 2012 9:24 PM
Turning Power On or Off
Some of this unit's functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last mode screen that
was displayed before the ignition key was turned off. For
example, if the unit is in radio mode when ignition is turned off,
it will remain in radio mode when ignition is turned back on.
2
Press and hold the Home/C button for at least 5
seconds to turn the power off.
• The unit can be turned on by pressing any button.
• The ICS-X7 is a precision device. Careful handling of the unit should
provide you with years of trouble-free operation.
Turning the System On
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
1
When the system is used for the first time, the
language selection menu is displayed. There are 15
languages to choose from. Touch [
scroll the list, and then touch the desired language.
• You can also scroll through lists by touching the screen and
sliding your finger up and down.
2
Touch [OK].
The radio screen is displayed.
• Some of this unit's functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake before attempting these operations.
12
-EN
01GB05ICS-X7.fm
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press RESET switch with a ballpoint pen or similar
pointed object.
Adjusting the Volume
Adjust the volume by pressing
Volume decreases/increases continuously by pressing and
holding
Volume: 0 - 35
Lowering Volume Quickly
] or [
] to
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
1
Press the MUTE button to activate the mute mode.
The audio level will decrease by about 20 dB.
• While muting, the volume indicator flashes.
2
Pressing MUTE button again will bring the audio
back to its previous level.
RESET switch
or
or
.
ALPINE ICS-X7 68-21057Z38-A (EN)
.
Advertisement
Table of Contents
