Camera Ready Light Status - Kodak CX7310 User Manual

Message
Camera error #XXXX.
See user's guide.

Camera ready light status

Status
Ready light does not
turn on and the
camera does not
work.
Ready light blinks
green.
Ready light blinks
amber.
Ready light blinks red
and camera turns off.
Ready light glows
steady red.
Ready light glows
steady green.
www.kodak.com/go/support
Cause
An error is detected.
Cause
Camera is not turned on. Turn on the camera
Batteries are exhausted
or are not charged.
Mode dial was on when
batteries were reloaded.
Picture is being
processed and saved to
the camera.
Flash is not charged.
Camera is initializing.
Batteries are low or
exhausted.
Camera's internal
memory or card is full.
Camera processing
memory is full.
Card is read-only.
Camera is on; ready to
take a picture or video.
Troubleshooting
Solution
Turn the Mode dial off, then back
on. If the message reappears,
contact Customer Support
(page 37).
Solution
Install new batteries
charge rechargeable batteries.
Turn Mode dial off, then back on.
Camera is operating normally.
Wait. Resume picture taking when
the light stops blinking and turns
green.
Install new batteries
charge rechargeable batteries.
Transfer pictures to the computer
(page 28), delete pictures from the
camera (page 18), switch image
storage locations (page
a card with available memory
(page 7).
Wait. Resume picture taking when
the light turns green.
Change the image storage location
to internal memory
a different card.
Camera is operating normally.
(page 4).
(page 2) or
(page 2) or
13), or insert
(page 13), or use
36