Pre-Tagging For Album Names - Kodak CX7310 User Manual

5 Place the camera on a flat surface or use a tripod.
6 Compose the scene.
Press the Shutter button, then move so that you are in the scene.
The Self Timer light blinks slowly for 8 seconds (then quickly for 2 seconds)
before the picture is taken.
The Self Timer turns off after you take the picture or turn off the camera.

Pre-tagging for album names

Use the Set Album (Still or Video) feature to pre-select album names before
you take pictures. Then, all the pictures or videos you take are tagged with
those album names.
First—on your computer
Use Kodak EasyShare software, V 3.0 or higher (see
page 23), to create album names on your computer, then copy up to 32 album
names to the camera's internal memory. See the Kodak EasyShare software
Help for details.
Second—on your camera
1 In any mode, press the Menu button.
2 Press to highlight Set Album (Still or Video)
button.
3 Highlight an album name, then press the OK button. Repeat to add
pictures or videos to more than one album.
Selected albums are noted with a check mark.
4 To remove a selection, highlight the album name then press the OK button.
To remove all album selections, select Clear All.
5 Highlight Exit, then press the OK button.
Your selections are saved. If you turn on the camera screen, your album
selection is displayed on the screen. A plus (+) after the album name means
more than one album is selected.
6 Press the Menu button to exit.
This setting remains until you change it.
www.kodak.com/go/support
Taking pictures and videos
Installing the software,
, then press the OK
14