Sd/Mmc Cards And Internal Memory - Kodak EasyShare CX6200 User Manual

Problem
Cannot transfer
pictures.
(The Add New
Hardware
Wizard cannot
locate drivers.)

SD/MMC Cards and Internal Memory

Problem
The camera
does not
recognize
SD/MMC card.
Camera freezes
up when a card
is inserted or
removed.
78
Chapter 10
Cause
Software is not installed. Disconnect USB cable. (If using
Software is installed
incorrectly.
Cause
The card may not be
SD/MMC certified.
The card may be
corrupt.
Card is not properly
inserted in camera.
Camera detects an
error when the card
was inserted or
removed.
Solution
camera dock, disconnect cable and
remove camera from dock). Install
EasyShare software
Disconnect the USB cable. Close all
open applications. Uninstall, then
re-install the software
To uninstall, go to Start/Settings/
Control Panel/Add/Remove
Programs.
Solution
Purchase a certified SD/MMC card.
Reformat the card
Caution: Formatting erases all
pictures and videos, including
protected files.
Insert a card into the slot, then push
to seat (page 11).
Turn the camera off, then back on.
Make sure the camera is off when
inserting or removing a card.
(page 57).
(page 57).
(page 55).