Changing The Default Print Quantity; Turning Off Quickview - Kodak EasyShare CX6200 User Manual

Changing the Default Print Quantity

The Default Print Quantity setting determines the value that is displayed on the
Share Print screen
1
Press the Menu button.
2
Press

Turning Off Quickview

After you take a picture or video, Quickview displays it on the camera screen
for approximately 5 seconds (see
power, turn off Quickview.
1
Press the Menu button.
2
Press
3 Highlight the Quickview icon
52
Chapter 6
(page 47). The default value is 1.
to highlight Setup Menu
3
Highlight the Default Print Quantity icon
4
Press
quantity, then press the OK button.
5 Press the Menu button to exit the menu.
This setting remains until you change it.
page 19
to highlight Setup Menu
4
Highlight Off, then press the OK button.
5 Press the Menu button to exit the menu.
The picture is not displayed on the
camera screen after you take it. To see the
picture or video, press the Review button.
This setting remains until you change it.
, then press the OK button.
, then press the OK button.
to select the new default
and page 30). To save battery
, then press the OK button.
, then press the OK button.