Operating Instructions; General Instructions; Adjusting The Picture - AOC LM2028 Service Manual

3. OPERATING INSTRUCTIONS

3.1 GENERAL INSTRUCTIONS

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
-
Press the power button to turn on the monitor, the power indicator will light up.
-

3.2 ADJUSTING THE PICTURE

The description for control function:
Main Menu Main Menu
Item Icon
Luminance
Image Setup
Image
Position
Color Temp.
‚ ñ SN[¶ u 5~ ô O î • D e™ N u(
Sub Menu
Sub Menu Item
Icon
Contrast
Brightness
Focus
Clock
H. Position
V. Position
Warm N/A
Cool N/A
User / Red
User / Green
QQ:505966338
Description
Contrast from Digital-register.
Backlight Adjustment
Adjust Picture Phase to reduce
Horizontal-Line noise
Adjust picture Clock to reduce
Vertical-Line noise.
Adjust the horizontal position of
the picture.
Adjust the vertical position of the
picture.
Recall Warm Color Temperature
from EEPROM.
Recall Cool Color Temperature
from EEPROM.
Red Gain from Digital-register.
Green Gain Digital-register.
Page 5 of 66
AOC LM2028
Adjust
Reset Value
Range
Recall Cool Contrast
0-100
Value
Recall Cool
0-100
Brightness Value
0-100 Do Auto Config
0-100 Do Auto Config
0-100 Do Auto Config
0-100 Do Auto Config
The Color
N/A
Temperature will be
set to Cool.
N/A
The User R/G/B
0-100
value(default is 70)
will not be Modified
0-100
by Reset function in