Operating Instructions; The Use Of Remote Control - AOC V22t Service Manual

2. Operating Instructions

2.1 The Use of Remote Control

POWER
Press to power ON/OFF (standby) TV.
(Note:TV is never completely power off
unless physically unplugged.)
TV
Press to choose TV source mode
directly.
VIDEO
Press repeatedly to toggle between AV
and S-VIDEO source modes
HDMI/PC
Press to toggle between HDMI and PC
source modes.
Component Signal
Press to choose Component source
mode directly.
0~9、1--
Press to enter channel numbers.
PRE CH
Press to display the previous channel
VOL
Press ∧ or ∨ to adjust the volume.
SOURCE:
Press to choose the input source:
PC Signal input, HDMI input,
Video input, S-Video input.
NICAM
Press to activate the TV sounds,
CH
Press to change TV channel up or down
"∧","∨","＜","＞", Press to adjust the
various function items on the menu.
OK
Press to display the submenu
MENU:
Press to open or exit MENU.
WIDE
Press to choose the display aspect.
DISPLAY
Press to show the information about the
input source or TV channel.
PICTURE
Press to switch the preset of video preset
mode:
SOUND
Press to switch the preset of audio preset
mode.
Sleep
Press to set sleep timer, setting 0~120
minutes before your TV turn off
automatically.Component input and TV input.
5